Skip to main content
Home

Electrical Repair and Fault Finding for Homes in Chh. Sambhajinagar (Aurangabad)

Home electrical repair in Chh. Sambhajinagar (Aurangabad): MCB trips, short circuits, no power in a room, sparking sockets. We find the fault and fix it.

Call +91 89832 37729WhatsApp us

Talk to us in Marathi, Hindi or English.

Rs 199 visit and inspection. Exact work price quoted before we start. Adjusted in your bill if you go ahead.

  • Engineer-led
  • IS-aligned (IS 732, IS 3043)
  • Written documentation

What does Electrical Repair and Fault Finding include?

When an MCB keeps tripping or one room suddenly goes dark, you need someone who finds the cause, not someone who resets the switch and leaves. Our technicians trace the fault to the circuit, joint or appliance behind it, explain what they found in plain words, and quote the repair before any work starts.

Included in this service

  • MCB or RCCB that trips again and again, or trips as soon as it is switched on
  • Short circuits, burnt wires and melted joints
  • No power in one room, one floor or one circuit while the rest of the house works
  • Sparking, loose or burnt switches and sockets
  • Fan, light, geyser or AC point that has stopped working
  • Mild shock from an appliance body, a metal door frame or a wet wall
  • Burning smell or heat from a switchboard or the distribution board
  • Checking whether a problem is inside the house wiring or on the supply side, and telling you plainly which it is

Who does the work

Founded by two BE Electrical engineers. Our lead engineer holds the Maharashtra Electrical Supervisor Licence.

  • Aligned with IS 732, IS 3043 and IS 5216
  • Every job follows one SOP: Isolate -> Verify dead -> Work -> Test -> Hand over
Opened power socket with its wires exposed during a home wiring repair

Who we do Electrical Repair and Fault Finding for

The homes and households we do this work for in Chh. Sambhajinagar (Aurangabad).

  • Independent houses and bungalows
  • Flats and apartments
  • Rented homes, for tenants and for owners
  • Older homes still on their original wiring

What happens during an Electrical Repair and Fault Finding visit?

Specific activities covered in a typical engagement. Scope varies by project - this is a representative list, not a fixed contract.

  • A short chat on WhatsApp or the phone about what happened, so the technician comes prepared
  • Visual check of the distribution board, MCBs, RCCB and main switch
  • Switching circuits off one by one to isolate the faulty circuit
  • Testing the faulty circuit with the right instruments to find the exact point of the fault
  • Repair or replacement of the faulty part: joint, wire run, switch, socket or MCB
  • Re-test, power restored, and a plain explanation of what caused the fault

Questions about Electrical Repair and Fault Finding? Call or WhatsApp - we answer directly.

Call +91 89832 37729WhatsApp us

Talk to us in Marathi, Hindi or English.

Process

How does the Electrical Repair and Fault Finding process work?

From inquiry to handover. Steps may vary depending on project size and site-specific conditions.

  1. Tell us what happened

    Call or WhatsApp us with what you are seeing: which MCB trips, which room has no power, whether there was a spark or a smell. A photo of the distribution board helps. If anything is sparking or smells of burning, switch off the main switch first.

  2. Technician visit

    Quick visits, 9 AM to 9 PM. Right away if a technician is free, otherwise at a time that suits you.

  3. Find the fault

    The technician isolates the circuit, tests it and finds the actual cause. Resetting an MCB that trips for a reason only hides the problem, so we look for the reason.

  4. Quote, then repair

    You get the repair price before any work starts. If you agree, we repair it in the same visit when the part is at hand.

  5. Test and explain

    After the repair we test the circuit again, restore power and tell you what caused the fault and whether anything else in the house needs attention.

Indian Standards we align with

Our work for this service is aligned with the following Indian Standards and statutory regulations.

  • IS 732:2019 - Code of practice for electrical wiring installations
  • IS/IEC 60898-1 - Circuit breakers (MCBs) for household and similar installations
  • IS 12640 - Residual current operated circuit breakers (RCCBs)
  • IS 3043:2018 - Earthing, checked where a fault points to the earth connection

What differentiates us

What we actually do differently on site.

  • We look for the cause of the fault instead of resetting the MCB and leaving.
  • You hear the repair price before any work starts.
  • Our lead engineer holds the Maharashtra Electrical Supervisor Licence and the team follows set procedures for testing and repair.
  • If the problem is on the supply side and not in your house wiring, we tell you plainly so you can raise it with the electricity company.
  • If the wiring is old and unsafe, we say so and quote separately. We do not push a rewiring job when a repair will do.

Common questions about this service

If your question is not here, WhatsApp us directly - we will give you a straight answer.

  • Why does my MCB keep tripping again and again?

    An MCB trips when a circuit draws more current than it is rated for, or when there is a short circuit. Common causes are too many heavy appliances on one circuit, a damaged wire or joint, water getting into a switchboard, or a faulty appliance. An RCCB trips on earth leakage, often from a faulty geyser, motor or damp wiring. The technician tests the circuit to find which one it is.

  • Should I keep resetting the MCB until the technician arrives?

    No. If an MCB trips again right after you reset it, leave it off and unplug the appliances on that circuit. Resetting it again and again on a live fault can heat the wiring. If there is a burning smell or sparking, switch off the main switch and keep away from the board.

  • One room has no power but the rest of the house is fine. What could it be?

    Usually a tripped or failed MCB for that room, a loose or burnt joint in a junction box, or a damaged wire inside the wall. Sometimes one faulty socket on the circuit cuts power to the rest of that room. It can usually be traced without breaking walls.

  • Can you tell if the problem is in my house wiring or in the supply?

    Yes. We check the incoming supply at your main switch first. If the fault is in the supply or the meter, it is the electricity company side and you need to raise a complaint with them. We tell you that plainly instead of charging for a repair inside the house.

  • Do you repair wiring that another electrician installed?

    Yes. Most repair calls are on wiring someone else did. If we find the original work was unsafe, for example undersized wire or no earth connection, we point it out and quote the correction separately.

  • Will you replace the whole wiring when only one circuit is faulty?

    No. We repair the faulty circuit. If the rest of the wiring is old or unsafe, we tell you what we saw and you decide whether to plan a rewiring later.

Related services

Other services from the same engineer-led team.

All services

Areas we cover for this service

We primarily operate in Chh. Sambhajinagar (Aurangabad) and the nearby MIDC belts for this type of work.

All service areas

Need Electrical Repair and Fault Finding at home?

Call or WhatsApp us with what needs doing and your area. We will fix a visit at a time that suits you. Available 9 AM to 9 PM, every day.

Call +91 89832 37729WhatsApp us

Talk to us in Marathi, Hindi or English.

Rs 199 visit and inspection. Exact work price quoted before we start. Adjusted in your bill if you go ahead.